device_support_status_a_c
This is an old revision of the document!
List of Supported Devices - A-C
| Manufacturer | Chip | Detected by sensors-detect | Driver | Bus | Supported since | Status/Comments |
|---|---|---|---|---|---|---|
| Abit | µGuru revision 1 and 2 | no | abituguru | ISA | 2.6.18 | A Winbond microcontroller using (undocumented) Abit written firmware. The revision of the µGuru chip is the same as the version of the windows µGuru utility Abit offers for your motherboard. |
| Abit | µGuru revision 3 | no | abituguru3 | ISA | 2.6.23 | A Winbond microcontroller using (undocumented) Abit written firmware. The revision of the µGuru chip is the same as the version of the windows µGuru utility Abit offers for your motherboard. |
| ALi | M5879 | yes | Datasheet available, one old request, no plan. | |||
| AMD | K8 | yes | k8temp | PCI | 2.6.19 or standalone driver | Latest AMD K8 processors have integrated sensors which can be read directly without any additional monitoring chip. Driver contributed by Rudolf Marek. Upgrade to lm_sensors 2.10.1 or later is mandatory, earlier versions of libsensors will fail with a “General parse error” message. Note: many recent K8 models (revision F and later) have been reported to have broken thermal sensors so the k8temp driver will return bogus values. Changes in kernel 2.6.29 may improve the situation a bit. Feedback welcome. See this FAQ entry if running kernel 2.6.33 or 2.6.34 on a rev. G desktop model. |
| AMD | Family 10h CPU, family 11h CPU | yes | k10temp | PCI | 2.6.33 or standalone driver | (2009-12-06) Embedded sensors are known to be unreliable on the DR-BA, DR-B2, DR-B3, RB-C2 and HY-D0 revisions of the family 10h CPU, which will never be supported. Driver contributed by Clemens Ladisch, reviewed by Jean Delvare. |
| AMD | Family 12h CPU, family 14h CPU | yes | k10temp | PCI | 2.6.38 or standalone driver | |
| AMD | Family 15h CPU | yes | k10temp, fam15h_power | PCI | 3.0 or standalone driver | (2014-03-12) Power monitoring driver contributed by Andreas Herrmann (AMD), reviewed by Jean Delvare. Note: we have had reports of completely wrong values being reported by the fam15h_power driver on some systems. See here for a hint. Kaveri support added in kernel 3.14. |
| AMD | Family 16h CPU | yes | k10temp, fam15h_power | PCI | 3.7.1 | (2014-03-12) Kabini support added in kernel 3.12. Mullins support added in kernel 3.15. |
| Analog Devices | ADM1022, ADM1028 | yes | thmc50 | I2C | 2.6.23 | |
| Analog Devices | ADM1191 | no | I2C | |||
| Analog Devices | ADM1275 | no | adm1275 | I2C | 3.0 or standalone driver | (2011-06-04) PMBus Hot-Swap Controller and Digital Power Monitor. Driver by Guenter Roeck. |
| Analog Devices | ADM1276 | no | adm1276 | I2C | 3.2 or standalone driver | (2011-08-28) PMBus Hot-Swap Controller and Digital Power Monitor. Driver by Guenter Roeck. |
| Analog Devices | ADT7310, ADT7320 | no | adt7310 | SPI | 3.10 | 16-bit temperature sensors. Driver contributed by Lars-Peter Clausen. |
| Analog Devices | ADT75 | no | lm75 | I2C | 3.2 | Compatible with the LM75, but not detected by the driver (must be instantiated explicitly.) |
| Analog Devices | ADT7408 | yes | jc42 | I2C | 2.6.36 | JEDEC JC-42.4 compliant temperature sensor for memory modules. Driver contributed by Guenter Roeck. |
| Analog Devices | AD7414 | no | ad7414 | I2C | 2.6.27 | (2008-08-08) Driver contributed by Sean MacLennan. |
| Analog Devices | AD7416, AD7417, AD7418 | no | ad7418 | I2C | 2.6.22 | |
| Analog Devices | ADT7411 | yes (I2C only) | adt7411 | I2C or SPI | 2.6.34 | Driver contributed by Wolfram Sang, reviewed by Jean Delvare. SPI support missing. |
| Analog Devices | ADT7470 | yes | adt7470 | I2C | 2.6.24 | Driver contributed by Darrick J. Wong. |
| Andigilog | aSC7511 | yes | I2C | No plan. | ||
| Andigilog | aSC7512, aSC7611 | yes | I2C | |||
| Andigilog | aSC7621 | yes | asc7621 | I2C | 2.6.34 | (2010-05-04) Found on the Intel D975XBX2 and WX58BP, amongst others. Driver contributed by George Joseph, reviewed by Ken Milmore, Jaswinder Singh Rajput and Hans de Goede. |
| Asus | AS99127F | yes | w83781d | I2C | 2.5.67 | No datasheet, incomplete support. |
| Asus | ASB100 | yes | asb100 | I2C | 2.6.2 | |
| Asus | ASM58 | yes | I2C | (2009-06-28) No datasheet. 2.6.15 driver developed by Rigel Freden, ported to 2.6.30 by Michael Loßin. | ||
| Asus | A8000 | yes | dme1737 | I2C | 2.6.23 | SMSC DME1737 in disguise. |
| Asus | ATK0110 | no | asus_atk0110 | ACPI | 2.6.30 | Virtual ACPI device. Driver contributed by Luca Tettamanti, reviewed by Hans de Goede. Requires lm-sensors >= 3.1.0. |
| Asus | F8000 | yes | f71882fg | LPC | 2.6.29 | (2008-12-16) Fintek chip in disguise. Support added by Hans de Goede. |
| Atmel | AT30TS00 | yes | jc42 | I2C | 3.0.24, 3.2.10, 3.3 | JEDEC JC-42.4 compliant temperature sensor. |
| Attansic | ATXP1 | no | atxp1 | I2C | 2.6.13 | (2005-10-17) Linux 2.6 driver contributed Sebastian Witt. |
device_support_status_a_c.1458756005.txt.gz · Last modified: 2016/03/23 18:00 by Guenter Roeck
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
