==== List of Supported Devices - A-C ====

^ Manufacturer  ^ Chip  ^ Detected by sensors-detect ^ Driver ^ Bus ^ Supported since ^ Status/Comments ^
| [[http://www.abit.com.tw/|Abit]] | [[http://www.abit.com.tw/page/en/news/newspop.php?pDOCNO=en_0309184|µGuru revision 1 and 2]] | no | abituguru | ISA | 2.6.18  | A Winbond microcontroller using (undocumented) Abit written firmware. The revision of the µGuru chip is the same as the version of the windows µGuru utility Abit offers for your motherboard. |
| [[http://www.abit.com.tw/|Abit]] | µGuru revision 3 | no | abituguru3 | ISA | 2.6.23  | A Winbond microcontroller using (undocumented) Abit written firmware. The revision of the µGuru chip is the same as the version of the windows µGuru utility  Abit offers for your motherboard.|
| ACPI | ACPI thermal zones | no  | thermal_sys | ACPI | 2.6.26 | ACPI thermal zones are now exposed as standard hwmon devices so libsensors will pick them. |
| [[http://www.ali.com.tw/|ALi]] | M5879 | yes |  |  |  | [[http://lists.lm-sensors.org/pipermail/lm-sensors/2004-March/006
782.html|Datasheet]] available, [[http://lists.lm-sensors.org/pipermail/lm-sensors/2002-May/000634.html|one old request]], no plan. |
| [[http://www.amd.com/|AMD]] | K8 | yes | k8temp | PCI | 2.6.19 or [[http://jdelvare.nerim.net/devel/lm-sensors/drivers/k8temp/|standalone driver]] | Latest AMD K8 processors have integrated sensors which can be read directly without any additional monitoring chip. Driver contributed by Rudolf Marek.  Upgrade to lm_sensors 2.10.1 or later is mandatory, earlier versions of libsensors will fail with a "General parse error" message. **Note: many recent K8 models (revision F and later) have been reported to have broken thermal sensors so the k8temp driver will return bogus values. Changes in kernel 2.6.29  may improve the situation a bit. Feedback welcome.** See this [[http://www.lm-sensors.org/wiki/FAQ/Chapter3#AMDK8supportin2.6.33and2.6.34kernels|FAQ entry]] if running kernel 2.6.33 or 2.6.34 on a rev. G desktop model. |
| [[http://www.amd.com/|AMD]] | Family 10h CPU, family 11h CPU | yes | k10temp | PCI | 2.6.33 or [[http://jdelvare.nerim.net/devel/lm-sensors/drivers/k10temp/|standalone driver]] | (2009-12-06) Embedded sensors are known to be unreliable on the DR-BA, DR-B2, DR-B3, RB-C2 and HY-D0 revisions of the family 10h CPU, which will never be supported. Driver contributed by Clemens Ladisch, reviewed by Jean Delvare. |
| [[http://www.amd.com/|AMD]] | Family 12h CPU, family 14h CPU | yes | k10temp | PCI | 2.6.38 or [[http://jdelvare.nerim.net/devel/lm-sensors/drivers/k10temp/|standalone driver]] |  |
| [[http://www.amd.com/|AMD]] | Family 15h CPU | yes | k10temp, fam15h_power | PCI | 3.0 or [[http://jdelvare.nerim.net/devel/lm-sensors/drivers/k10temp/|standalone driver]] | (2014-03-12) Power monitoring driver contributed by Andreas Herrmann (AMD), reviewed by Jean Delvare. **Note: we have had reports of [[http://lists.lm-sensors.org/pipermail/lm-sensors/2011-November/034243.html|completely wrong values]] being reported by the fam15h_power driver on some systems. See [[http://lists.lm-sensors.org/pipermail/lm-sensors/2012-January/034905.html|here]] for a hint.** Kaveri support added in kernel 3.14. |
| [[http://www.amd.com/|AMD]] | Family 16h CPU | yes | k10temp, fam15h_power | PCI | 3.7.1 | (2014-03-12) Kabini support added in kernel 3.12. Mullins support added in kernel 3.15. |
| [[http://www.analog.com/|Analog Devices]] | ADM1022, ADM1028 | yes | thmc50 | I2C | 2.6.23 |  |
| [[http://www.analog.com/|Analog Devices]] | [[http://www.analog.com/en/power-management/power-monitors/adm1191/products/product.html|ADM1191]] | no |  | I2C |  | (2010-06-07) Digital power monitor. [[http://lists.lm-sensors.org/pipermail/lm-sensors/2010-June/028701.html|Anthony Jackson is interested and might write a driver.]] 
| [[http://www.analog.com/|Analog Devices]] | [[http://www.analog.com/en/power-management/hot-swap/adm1275/products/product.html|ADM1275]] | no | adm1275 | I2C | 3.0 or [[http://www.roeck-us.net/linux/drivers/|standalone driver]] | (2011-06-04) PMBus Hot-Swap Controller and Digital Power Monitor. Driver by Guenter Roeck. |
| [[http://www.analog.com/|Analog Devices]] | [[http://www.analog.com/en/power-management/hot-swap/adm1276/products/product.html|ADM1276]] | no | adm1276 | I2C | 3.2 or [[http://www.roeck-us.net/linux/drivers/|standalone driver]] | (2011-08-28) PMBus Hot-Swap Controller and Digital Power Monitor. Driver by Guenter Roeck. |
| [[http://www.analog.com/|Analog Devices]] | [[http://www.analog.com/en/sensors/digital-temperature-sensors/adt7310/products/product.html|ADT7310]], [[http://www.analog.com/en/mems-sensors/digital-temperature-sensors/adt7320/products/product.html|ADT7320]] | no | adt7310 | SPI | 3.10 | 16-bit temperature sensors. Driver contributed by Lars-Peter Clausen. |
| [[http://www.analog.com/|Analog Devices]] | [[http://www.analog.com/en/mems-sensors/digital-temperature-sensors/adt75/products/product.html|ADT75]] | no | lm75 | I2C | 3.2 | Compatible with the LM75, but not detected by the driver (must be instantiated explicitly.) |
| [[http://www.analog.com/|Analog Devices]] | [[http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf|ADT7408]] | yes | jc42 | I2C | 2.6.36 | JEDEC JC-42.4 compliant temperature sensor for memory modules. Driver contributed by Guenter Roeck. |
| [[http://www.analog.com/|Analog Devices]] | [[http://www.analog.com/en/prod/0%2C2877%2CAD7414%2C00.html|AD7414]] | no | ad7414 | I2C | 2.6.27 | (2008-08-08) Driver contributed by Sean MacLennan. |
| [[http://www.analog.com/|Analog Devices]] | [[http://www.analog.com/en/prod/0,,766_814_AD7416,00.html|AD7416]], [[http://www.analog.com/en/prod/0,,766_814_AD7417,00.html|AD7417]], [[http://www.analog.com/en/prod/0,,766_814_AD7418,00.html|AD7418]] | no | ad7418 | I2C | 2.6.22 |  |
| [[http://www.analog.com/|Analog Devices]] | [[http://www.analog.com/en/sensors/digital-temperature-sensors/adt7411/products/product.html|ADT7411]] | yes (I2C only) | adt7411 | I2C or SPI | 2.6.34 | Driver contributed by Wolfram Sang, reviewed by Jean Delvare. SPI support missing. |
| [[http://www.analog.com/|Analog Devices]] | [[http://www.analog.com/en/prod/0,2877,ADT7470,00.html|ADT7470]] | yes | adt7470 | I2C | 2.6.24 | Driver contributed by Darrick J. Wong. |
| Andigilog | aSC7511 | yes |  | I2C |  | No plan. |
| Andigilog | aSC7512, aSC7611 | yes |  |  I2C |  |  |
| Andigilog | aSC7621 | yes | asc7621 | I2C | 2.6.34 | (2010-05-04) Found on the Intel D975XBX2 and WX58BP, amongst others. Driver contributed by George Joseph, reviewed by Ken Milmore, Jaswinder Singh Rajput and Hans de Goede. |
| [[http://www.asus.com/|Asus]] | AS99127F | yes | w83781d | I2C | 2.5.67 | No datasheet, incomplete support. |
| [[http://www.asus.com/|Asus]] | ASB100 | yes | asb100 | I2C |2.6.2 |  |
| [[http://www.asus.com/|Asus]] | ASM58 | yes |  | I2C |  | (2009-06-28) No datasheet. [[http://lists.lm-sensors.org/pipermail/lm-sensors/2006-March/015735.html|2.6.15 driver]] developed by Rigel Freden, [[http://lists.lm-sensors.org/pipermail/lm-sensors/2009-June/026173.html|ported to 2.6.30]] by Michael Loßin. |
| [[http://www.asus.com/|Asus]] | A8000 | yes | dme1737 | I2C | 2.6.23 | SMSC DME1737 in disguise. |
| [[http://www.asus.com/|Asus]] | ATK0110 | no | asus_atk0110 | ACPI | 2.6.30 | Virtual ACPI device. Driver contributed by Luca Tettamanti, reviewed by Hans de Goede. Requires lm-sensors >= 3.1.0. |
| [[http://www.asus.com/|Asus]] | F8000 | yes | f71882fg | LPC | 2.6.29 | (2008-12-16) Fintek chip in disguise. Support added by Hans de Goede. |
| [[http://www.atmel.com/|Atmel]] | [[http://www.atmel.com/devices/at30ts00.aspx|AT30TS00]] | yes | jc42 | I2C | 3.0.24, 3.2.10, 3.3 | JEDEC JC-42.4 compliant temperature sensor. |
| [[http://www.attansic.com/english/index.html|Attansic]] | ATXP1 | no | atxp1 | I2C | 2.6.13 | (2005-10-17) Linux 2.6 driver contributed Sebastian Witt. |